That was a vacation, I guess.
It was suspiciously taxing, all in all. Time off from work hasn't been nearly as relaxing since we had a kid, but that's a digression. Over the past little while, I've managed to finally make use the 120G solid state drive I picked up half a year ago, install various distros, and put together about one third of a utility to ease a project or two I'm working on in my spare time.
It's at once larger and smaller than the last one. On the one hand, thanks to its smaller physical profile, I can fit it into my laptop with no mods. On the other hand,
df -h says
106G|1| instead of
That's it, nothing else to see here.
Since I was between drives anyhow, I took the opportunity to get the fresh version of Debian up and running. That was worth it, by the by, if for no other reason than they've apparently poured enough bucketfulls of time into the networking code that I can now reliably connect to my wifi access point even if I'm not within two meters of it. They also seemed to lick a problem I kept running into wherein the shutdown process would hang the machine|2|.
There were a few changes in my install routine, which is still vaguely based on
## temporarily add ## deb http://packages.linuxmint.com debian import ## and `contrib non-free` to /apt/sources.lisp apt-get install firmware-ralink firmware-realtek apt-get install screen make emacs24 git gitk wicd-curses pmount htop gnupg unetbootin apt-get install mplayer feh pacpl imagemagick x-window-system dmenu xmonad gimp inkscape firefox apt-get install python-pip sbcl vrms ## remove the temporary repos
There are a couple of changes there from my usual. Firstly, Firefox has become my go-to browser. Its absorbed most of the goodness from Chromium, including the reduced toolbar footprint and fantastic JS console. It also has support for adblock, and a fairly good RSS feed reader, and it's no longer slow as molasses|3|. This raises the problem of the Debian packaging though; in the official repos,
apt-get install firefox gets you a pretty ham-fisted re-brand with no plugin support called "Iceweasel". What I ended up doing, as you can see above, is temporarily adding the Linux Mint repo to install that|4|. Secondly, I'm installing
emacs24 rather than just plain
emacs. This is because the current default for
emacs in Jessie is Emacs 23.something, and that doesn't have one of the main features I'm looking to finally adopt.
Emacs 24 supports
package out of the box. In practice, this means adding
(require 'package) (add-to-list 'package-archives '("melpa" . "http://melpa.milkbox.net/packages/") t)
.emacs instead of toting my old
.emacs.d/ around. I can't actually remember every library I used to have around, so the list I settled on this time out ended up being
aes auto-complete autopair highlight-parentheses htmlize skewer-mode magit markdown-mode paredit redo+ smart-tab yasnippet
Which covers pretty much everything. Oh, one thing. I spent about half an hour figuring out what was going wrong with my
.emacs config; libraries I was certain had been installed were coming back with
not found errors when I tried to
require them. It turns out that when you add a directory to the load path, you don't automatically add all its subdirectories. As you can see by the above list of packages, I use quite a few, each of which gets its own sub-directory in
.emacs.d/elpa/, and wildcards don't work here either. So I was forced to add the following to convenience.el, just to save myself the tedium
(defun starts-with-dot-p (path) (= (aref path 0) ?.)) (defun list-subdirectories (path) (let ((all (mapcar (lambda (name) (concat (file-name-as-directory path) name)) (remove-if #'starts-with-dot-p (directory-files path))))) (remove-if-not #'file-directory-p all))) (defun add-to-load-path (dirs) (mapc (lambda (p) (add-to-list 'load-path p)) dirs))
then called this near the top of that
(add-to-load-path (list-subdirectories "~/.emacs.d/elpa"))
This let me continue as normal. The only omission from that emacs package list is
slime, which I've lately been installing from
sbcl or what-have-you with
(ql:quickload :quicklisp-slime-helper) rather than through Emacs itself. It works exactly as well as you'd expect, which is to say flawlessly.
Doing that got me into an installing mood, so I also formatted a fresh couple of SD cards with the latest versions of ARM Arch and Raspbian respectively. I did this with the vague intention of getting
deal to work with one or both, and it looks like that'll take a bit more work than just a straight-up
ql:quickload. Differences before I get to that though.
The RPi arch is much closer to what I'm used to on my laptop. A brutally minimal installation of the few core utilities you need to get basic shit done, and nothing else. Specifically, it gives you
perl, a working
ssh server and a minimally intrusive wireless connection mechanism that could replace
wicd-curses for me. Raspbian, by contrast, bundles a mandatory window environment along with a bunch of crap that's probably nice for most humans looking to use it as a desktop replacement, but that I'll never end up touching. Also, they bundle Scratch as well as Python 2 and 3. Finally, while they do provide an
ssh server, it's off by default, and the first time you boot a Raspbian image, it forces
raspi-config, which means that you must connect a Raspbian Pi to a monitor and keyboard at least once.
That minimalism ends up biting Arch a bit though; it doesn't come with the standard
raspi-config utility, which lets you dick around with the hardware to some small extent, and easily resize the installation partition to fill the SD card|5|. The other thing that bites ARM Arch in the ass, as far as I'm concerned, is the fact that its package manager has very few of the things I want to install. Out of my usual menagerie, I found
emacs and nothing else. By contrast, I had to
apt-get --purge a bunch of things over on Raspbian, but I was eventually able to get it working with an almost copy of my laptop environment.
Almost, because Lisp still has some problems.
clisp segfaults on both ARM Arch and Raspbian when you try to load anything with
quicklisp, while the ARM ccl failed to run at all on Arch|6|. Raspbian did run
ccl appropriately, but errored out on me for two reasons. Firstly, there's something unsupported about the
:ironclad MD5 digest, and secondly, the ARM architecture seems to treat bivalent streams differently than x86. Which means that even running its custom
:deal errored out.
I'll be trying to fix that over the next little while.
Finally, on a merely semi-related note, I'm working on a couple of projects on my own time that are eventually going to want to do some sort of file management. And I figured it would be nice not to have to bring
git into it manually after the fact. To that end, I took a look at how
gitit manages the trick of using git as a faux-database for its wiki pages. It's not that complicated, as it turns out. And here's the result of spending an hour or two porting that piece of functionality to Common Lisp.
The biggest problem I'm running into is that there isn't a standard
run-program defined in the various Lisps I want to support.
I'm tossing it up to my github, but calling it
0.01 because there's a fuckton of functionality and documentation missing. In particular, it currently only supports SBCL on Linux, and a few of the external API functions still return raw string results, rather than properly parsed CLOS instances. The documentation and parsing will be a priority no matter what, but I'll only see how it runs on other platforms and implementations as I need to deploy to them.
1 - |back| - Of course, the drive box says 128G, so Samsung and all drive manufacturers are lying shitbags, but I'm digressing again.
2 - |back| - And therefore keep drawing power until a forced shutdown.
3 - |back| - which it was last time I played around with it.
4 - |back| - No, since you ask, I've never just straight up tried Mint. It has something in common with most of the distros I get recommended, which is that it cribs heavily from Debian on everything that matters, and then tries to differentiate on the desktop environment almost entirely. Not that this is bad for end users I guess, but as you can see from the
xmonad items in that installation list above, I do not use what you would think of as "a desktop environment". Don't let that stop you from trying it, of course, but I'm not going to.
5 - |back| - You can still do this externally via
gparted when you image your SD card.
6 - |back| - running the included binary gave me a "wrong architecture" error, even though there's no way that's accurate.